The difference between refurbished and remanufactured items is that a remanufactured product is restored to like-new quality not only in its appearance, but in its performance, and parts are almost always rebuilt or replaced. A rebuilt product is recovered by inspecting, cleaning, and replacing all parts that are worn or broken. Provided that the parts that are not worn or broken fit into the acceptable wear limits laid out by the manufacturer, they will not be replaced, and therefore, the components in the product will have different levels of wear.
Whether a product is rebuilt or remanufactured, its functionality will be restored. However, remanufacturing is a more comprehensive process in which each component of the product is returned to manufacturer standards. Reconditioning is the product recovery process that is the most similar to remanufacturing. Here are some of the major reasons that opting to use remanufactured products or parts can be beneficial to you and to the environment:. The math is simple: Remanufactured parts or products are frequently cheaper than new ones.
Choosing remanufactured parts should be a no-brainer. Remanufacturing is also a much faster option than purchasing new. This can translate into months of increased production and profit for the end-user. The disassembly process in remanufacturing involves more than simply taking the product apart.
As a pump is disassembled, an inventory of items is carefully made and the need for new components is identified. The pump is then dismantled and thoroughly cleaned using a number of different processes, with extreme care taken to keep all components in working order.
The fully disassembled and cleaned pump is then inspected to assess the condition of all of its components, as well as the size and concentricity of critical dimensions. This information is then documented in an inspection report. An engineering review is performed using the results of the disassembly inspection report, along with other collected information, to determine the order specifications for the remanufacturing process.
Remanufacturing is the rebuilding of a product to specifications of the original manufactured product using a combination of reused, repaired and new parts. It requires the repair or replacement of worn out or obsolete components and modules. Parts subject to degradation affecting the performance or the expected life of the whole are replaced. Remanufacturing is a form of a product recovery process that differs from other recovery processes in its completeness: a remanufactured machine should match the same customer expectation as new machines.
Refurbished is the distribution of products usually electronics and electricals that have been previously returned to a manufacturer or vendor for various reasons. The main difference between "refurbished" and "used" products is that refurbished products have been tested and verified to function properly, and are thus free of defects, while "used" products may or may not be defective.
Refurbished products may be unused customer returns that are essentially "new" items, or they may be defective products that were returned under warranty, and resold by the manufacturer after repairing the defects and ensuring proper function. Remanufacturing is a more thorough and costly process because it is more rigorous and works toward a higher standard than refurbishing.
If the vendor cannot meet the actual definition of remanufactured reassembling to meet or exceed the OEM specifications , then it should be considered a refurbished product. When you choose to either replace, repair or stock electronic equipment always choose remanufacturing to ensure the highest quality and to minimize the risk of future problems.
Employee Spotlight. Remanufactured vs. It's a little labor intensive, but will likely save you some money. Keep in mind, though, these kits don't usually address major injector failures and the finished product doesn't come with the same guarantees a new or remanned injector might. In the case of quality remanufactured injectors, they will be cleaned thoroughly, and all major components will be replaced. This can include your actuator assemblies, spill valves, solenoid, NOP springs, washer, shim, screw, and stop, depending on the injector itself.
If you're interested in learning more about injector repair kits and remanned injectors, check out our past blog. Likewise, you have a couple options when it comes to replacing your cylinder head. You can, of course, buy a new one, or you can look at rebuilding your head or purchasing a remanufactured one. Rebuilding a head allows you to replace some of the broken or worn components, as well as the possibility of welding any cracks.
This option may cost less than purchasing a cylinder head and may work in the short term, but if you want your head to last another million miles, you might be better off purchasing a reman.
To find out some of the problems associated with rebuilding a cylinder head, read our post on rebuilt vs. As we've discussed, with a remanufactured head, all the components will be replaced. It might cost more, but you're likely to get significantly more miles out of it. You just want to make sure you're getting one that has actually been remanufactured. The process of remanufacturing a head typically includes casting, machining, pressure testing, cleaning, and installation of new parts.
These three terms are used pretty loosely, which can make it hard to know exactly what you're going to get.
0コメント